| | I recently made 2 steam cannons, one with a friend, and one on my own, and since they work well, I thought I'd post instructions here on how to make one. The first things you'll need are 2 lengths of 15MM Copper Piping. You also need 2 spanners, something to heat the cannon with, and a pipe stopper, and a valve (one with a handle for opening/closing). Now, the actual guide: Get your first piece of copper pipe, and attach the pipe stopper to one end, and the valve to the other. Connect a second copper pipe to the end of the valve. Very simple, and to set it off, Pour water into the unclosed copper pipe and close the valve. Heat up the closed off tube (now things get dangerous, use some safety equipment), and after a while, release the valve. A load of steam will come flying out. You can put a bit of a potato in the copper pipe to send it flying. DISCLAIMER: I take no responsibility for any accidents caused by this. Do it at your own risk. |

